{"id":20,"date":"2008-05-18T13:33:35","date_gmt":"2008-05-18T13:33:35","guid":{"rendered":"https:\/\/fir3netwp.gmsrrpobkbd.com\/2008\/05\/18\/installing-ios-onto-a-new-flash\/"},"modified":"2021-07-24T19:40:44","modified_gmt":"2021-07-24T19:40:44","slug":"installing-ios-onto-a-new-flash","status":"publish","type":"post","link":"https:\/\/www.fir3net.com\/Routers\/Cisco\/installing-ios-onto-a-new-flash.html","title":{"rendered":"Router – Installing IOS onto new FLASH"},"content":{"rendered":"
You will need to first install the flash module into the device.
Then run the following commands via the console port (rommon), to check your systems resources for the install.<\/p>\n
rommon 1 > dev
rommon 2 > meminfo <\/p>\n
Then to copy it from your tftp server…<\/p>\n
rommon 3 > IP_ADDRESS=192.168.4.1
rommon 4 > IP_SUBNET_MASK=255.255.255.0
rommon 5 > DEFAULT_GATEWAY=192.168.4.100
rommon 6 > TFTP_SERVER=172.16.1.88
rommon 7 > TFTP_FILE=c2600-i-mz.123-4.bin<\/p>\n
rommon 8 > tftpdnld <\/p>\n
IP_ADDRESS: 192.168.4.1
IP_SUBNET_MASK: 255.255.255.0
DEFAULT_GATEWAY: 192.168.4.100
TFTP_SERVER: 172.16.1.88
TFTP_FILE: c2600-i-mz.122-12.bin<\/p>\n
Invoke this command for disaster recovery only.
WARNING: all existing data in all partitions on flash will be lost!
Do you wish to continue? y\/n: [n]: y
.
Receiving c2600-i-mz.123-4.bin from 172.16.1.88 !!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
File reception completed.
Copying file c2600-i-mz.123-4.bin to flash.<\/p>\n
Erasing flash at 0x60ac0100
program flash location 0x6052190<\/p>\n
rommon 9 > dir flash:
rommon 10 > confreg 0x2101
rommon 11 > reset <\/p>\n","protected":false},"excerpt":{"rendered":"
You will need to first install the flash module into the device. Then run the following commands via the console port (rommon), to check your systems resources for the install. rommon 1 > devrommon 2 > meminfo Then to copy it from your tftp server… rommon 3 > IP_ADDRESS=192.168.4.1 rommon 4 > IP_SUBNET_MASK=255.255.255.0 rommon 5 … Read more<\/a><\/p>\n","protected":false},"author":2,"featured_media":0,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[12],"tags":[],"yoast_head":"\n