{"id":263,"date":"2009-07-08T13:55:37","date_gmt":"2009-07-08T13:55:37","guid":{"rendered":"https:\/\/fir3netwp.gmsrrpobkbd.com\/2009\/07\/08\/checkpoint-upgrade-to-r70-status1-patch-installation-failed\/"},"modified":"2023-02-24T13:07:20","modified_gmt":"2023-02-24T13:07:20","slug":"checkpoint-upgrade-to-r70-status1-patch-installation-failed","status":"publish","type":"post","link":"https:\/\/www.fir3net.com\/Firewalls\/Checkpoint\/checkpoint-upgrade-to-r70-status1-patch-installation-failed.html","title":{"rendered":"Check Point Upgrade to R70: status=1 Patch installation failed"},"content":{"rendered":"

Issue<\/strong><\/p>\n

When upgrading to R70 on SPLAT you may receive the following error,<\/p>\n

CPwrapper: Wrapper part one completed successfully, data saved
\nUpgrading the operating system.
\nPreparing to upgrade Check Point Products.
\nstatus=1
\nExiting ..
\nPatch installation failed.<\/span><\/p>\n

Please Note : <\/em>This refers to a copied iso file which has been copied to the device and mounted rather then an upgrade with physical cd media within the cdrom drive.<\/p>\n

Solution<\/strong><\/p>\n

This is due to not changing to the \/mnt\/cdrom<\/strong> directory before running the `patch add cd` command. You can also run into problems were you have mounted the `Check_Point_R70_CD1.Splat.iso` but there is still a CD in the drive. To resolve the issue\/error above you need to,<\/p>\n

    \n
  1. Go into sysconfig<\/li>\n
  2. Select option 10 (Product Installation)<\/li>\n
  3. Run through the wizard again.<\/li>\n
  4. Once complete reboot the firewall.<\/li>\n<\/ol>\n

    Additional Notes<\/strong><\/p>\n

    Before running through any upgrade you should first confirm that their is no cd mounted or inserted into the drive<\/p>\n