<\/span><\/h2>\nThere are a number of steps required in configuring Active \/ Passive Simple on a SRX device, however there is one point that I should point out. Once chassis clustering has been enabled the system will automatically renumber some of the interfaces, i.e FAB is renumbered to ge-2\/0\/1 instead of ge-0\/0\/1.<\/p>\n
To help with the following configuration steps below shows a visual representation of our setup,<\/p>\n
<\/p>\n
<\/strong><\/p>\n<\/span> <\/strong><\/span><\/h4>\n<\/span>Enable Chassis Clustering<\/strong><\/span><\/h4>\nFirst of all Chassis Clustering is enabled on each of the nodes. This is the only point during the configuration that each of the nodes will require a reboot.<\/p>\n
#set groups node0 system host-name SRX-A
#set groups node0 interfaces fxp0 unit 0 family inet address 172.16.1.1\/24
#set groups node1 system host-name SRX-B
#set groups node1 interfaces fxp0 unit 0 family inet address 172.16.1.2\/24
#set apply-groups \"${node}\"<\/pre>\n<\/span>Configure Fabric Interfaces<\/strong><\/span><\/h4>\nNext the fabric (dataplane link) is configured.<\/p>\n
#set chassis cluster redundancy-group 0 node 0 priority 100
#set chassis cluster redundancy-group 0 node 1 priority 1
#set chassis cluster redundancy-group 1 node 0 priority 100
#set chassis cluster redundancy-group 1 node 1 priority 1<\/pre>\n<\/span>Interface Monitoring<\/strong><\/span><\/h4>\nEach interface that should be monitored is then configured and placed into the redundancy-group.<\/p>\n
#set chassis cluster reth-count 2
#set interfaces fe-0\/0\/2 fastether-options redundant-parent reth0
#set interfaces fe-2\/0\/2 fastether-options redundant-parent reth0
#set interfaces reth0 redundant-ether-options redundancy-group 1
#set interfaces reth0 unit 0 family inet address 192.168.1.1\/24
#set interfaces ge-0\/0\/0 fastether-options redundant-parent reth0
#set interfaces ge-2\/0\/2 fastether-options redundant-parent reth0
#set interfaces reth1 redundant-ether-options redundancy-group 1
#set interfaces reth1 unit 0 family inet address 82.1.1.1\/24<\/pre>\n