Below shows you the commands required to change the IP address of an interface within clish on a IPSO Nokia gateway,
add interface eth1c0 address IP [NEW IP]/[NETMASK] delete interface eth1c0 address [OLD IP] set interface eth1 speed 100M duplex full active on set interface eth1c0 enable
Below gives you an example :
nokia-firewall[admin]# clish NokiaIP390:102>add interface eth1c0 address IP 192.168.1.1/24 NokiaIP390:102>delete interface eth1c0 address 172.16.1.1 NokiaIP390:102>set interface eth1 speed 100M duplex full active on NokiaIP390:102>set interface eth1c0 enable
Rick Donato is a Network Automation Architect/Evangelist and the founder of Packet Coders.
Latest posts by Rick Donato (see all)
- NETCONF & YANG: Automate Network Configs via Python - April 2, 2026
- Palo Alto – How to Configure Your Next-Generation Firewall - April 2, 2026
- How to Harden Linux SSH: Keys, Fail2ban & Ciphers - March 1, 2026
Want to become an IT Security expert ?
Here is our hand-picked selection of the best courses you can find online:
Internet Security Deep Dive course
Complete Cyber Security Course – Hackers Exposed
CompTIA Security+ (SY0-601) Certification Complete course
and our recommended certification practice exams:
Delta Practice Tests