IPSO – Commands

Below are the common IPSO commands that can be used,

IPSO commands

newimageInstalls IPSO OS from the local machine
newpkg -m localhostCheck Point package Install
clishIPSO OS CLI
ipsctl -adisplays all of the IPSO Settings and Values
ipsctl -a ifphys:eth-s5p1:errors|moredisplay errors on eth-s5p1
ipsctl -w net:ip:tcp:default_mss 1460Change MSS to 1460
netstat 1shows network stats every second
ipsofwd listdisplays ipso properties (flowpath, etc)
ipsofwd slowpathturns off flows (flowpath turns back on)
fsck -fyb 32check the file system on a flash based nokia (KB 1355433)

Bootmgr

printenvprint environment variables
installinstall an image across the network
bootboot  an image

clish commands

show useful-statsShows Disk, VRRP, RAM summary
show package allList all packages
show package activeList active packages
show package inactiveList inactive packages
show imagesShow installed images
show image currentShow current image
delete image [name]Delete image
set hostname testboxSet Hostname
set date timezone-city “Greenwich (GMT)”Set Timezone
set static-route default nexthop gateway address 192.168.29.2 priority 1 onSet default gateway
set static-route 10.2.2.15/32 nexthop gateway address 192.168.0.1 onAdd static routes
hostname testboxSet hostname
set package name name [on | off]Set package name
add arpproxy address 192.168.1.1 macaddress 0:a0:1b:3e:33:f1Add Proxy arp
add ntp server 10.1.1.2 version 3 prefer yesAdd an NTP server
add package media local name [opt/packages/IPSO-3.9.tgz]Add package
add host name testbox ipv4 192.168.29.54Set hostname assignment
Rick Donato

Want to become an IT Security expert?

Here is our hand-picked selection of the best courses you can find online:
Internet Security Deep Dive course
Complete Cyber Security Course – Hackers Exposed
CompTIA Security+ (SY0-601) Certification Complete course
and our recommended certification practice exams:
AlphaPrep Practice Tests - Free Trial