fir3net
PPS-Firenetbanner-780.5x190-30-03-17
  • Home
  • Articles
  • Loadbalancers
  • Brocade
  • Brocade ADX - How do I show the CPU usage for the MP (Management Processor) ?

Brocade ADX - How do I show the CPU usage for the MP (Management Processor) ?

Question

How do I show the CPU usage for the management processor ?

Answer

To see the CPU usage on the MP (Management Processor) the following command is used,

SSH@adx# show cpu-utilization
peak: 41.4 percent busy at 5520 seconds ago
7243 sec avg: 10.3 percent busy
   1 sec avg:  1.0 percent busy
   5 sec avg: 10.5 percent busy
  60 sec avg: 10.5 percent busy
 300 sec avg: 10.3 percent busy
ASB1/1 peak: 0.9% in 1h14m, last sec: 0.1%, 5 sec: 0.1%, 60 sec: 0.1%, 300 sec: 0.1%
ASB1/2 peak: 0.9% in 13m20s, last sec: 0.1%, 5 sec: 0.1%, 60 sec: 0.1%, 300 sec: 0.1%
ASB1/3 peak: 7.7% in 2m14s, last sec: 0.1%, 5 sec: 0.1%, 60 sec: 0.1%, 300 sec: 0.1%
ASB1/4 peak: 1.0% in 1h59m, last sec: 0.1%, 5 sec: 0.1%, 60 sec: 0.1%, 300 sec: 0.1%

Note : the actual MP usage is highlighted in yellow, the other totals relate to the BP`s (Barrell Processors).

To see a breakdown of the processor usage across each of the processes running on the MP the following command is used,

SSH@adx# show proc cpu
first_index 751
Process Name   5Sec(%)   1Min(%)   5Min(%)   15Min(%)
ACL              0.0       0.0       0.0       0.0
ARP              0.0       0.0       0.0       0.0
BGP              0.0       0.0       0.0       0.0
ICMP             0.0       0.0       0.0       0.0
IP               0.2       0.2       0.2       0.2
ISIS             0.0       0.0       0.0       0.0
L2VLAN           0.0       0.0       0.0       0.0
NAT              0.0       0.0       0.0       0.0
OSPF             0.0       0.0       0.0       0.0
RIP              0.0       0.0       0.0       0.0
STP              0.0       0.0       0.0       0.0
VRRP             0.0       0.0       0.0       0.0
IPV6             0.0       0.0       0.0       0.0
ICMP6            0.0       0.0       0.0       0.0
ND6              0.0       0.0       0.0       0.0
OSPFv3           0.0       0.0       0.0       0.0
IPV6_RX          0.0       0.5       0.6       0.8


 

Tags: Brocade, ADX

About the Author

RDonato

R Donato

Rick Donato is the Founder and Chief Editor of Fir3net.com. He currently works as a Principal Network Security Engineer and has a keen interest in automation and the cloud.

You can find Rick on Twitter @f3lix001