fir3net
PPS-Firenetbanner-780.5x190-30-03-17

How do I Enable SNMP on a PIX / ASA ?

Below shows you the commands to enable SNMP (polls or traps) on PIX/ASA v7.x or later.....

pix(config)# snmp-server host [interface_name] [ip_address] trap community [community string]
pix(config)# snmp-server host [interface_name] [ip_address] poll community [community string]

Tags: ASA, PIX, Cisco, SNMP, Firewall

About the Author

RDonato

R Donato

Ricky Donato is the Founder and Chief Editor of Fir3net.com. He currently works as a Principal Network Security Engineer and has a keen interest in automation and the cloud.

You can find Ricky on Twitter @f3lix001